How to install the shower room
Feb 08, 2022
1. Prepare the necessary tools.
2. Install the bottom basin: Combine the bottom basin parts, adjust the bottom basin level, and ensure that there is no water in the basin and the bottom of the basin. The hose can be extended and retracted with the distance to firmly connect the basin bottom and the floor drain.
3. Testing and protection: After installation, it is necessary to conduct a water test to ensure that the water is unobstructed. Fourth, locate and drill holes: use a pencil and a spirit level to determine the drilling position of the aluminum material against the wall, and use an impact drill to drill the holes.
4. Install the aluminum material: Knock the glue in the drilled hole, and lock the aluminum strip to the wall with screws.
5. Fix the glass: clamp the glass to the bottom hole and fix it with screws.
6. Install the jacking pipe: find the corresponding position above the fixed glass to drill holes, install the (straight/inclined) fixing seat and connect the jacking pipe. Secure it to the top of the glass with an elbow sleeve.
7. Install the shelf: install the shelf at the correct position, tighten the nut of the laminate, and fix the glass of the laminate to keep it vertical and horizontal. Note that waterproofing is done under the aluminum that holds the glass.
8. Install the movable door: Install the hardware of the movable door, and install the hinge at the reserved hole of the fixed door. After installation, adjust the position of the axis of the lotus leaf until the door feels the best when closing.
9. Do a good job of waterproofing: install suction strips or water-retaining strips on the side or under the glass as required. Use silicone to seal the joints between aluminum and wall, glass and bottom basin.
10. Debugging and tightening: Check whether each part is comfortable and smooth to use, and adjust it in time if any problem is found. After adjustment, tighten the corresponding screws to make the entire shower room more solid.
11. Finishing work: clip the decorative aluminum strips into the wall-mounted aluminum material to ensure its appearance is neat and generous. Finally, wipe the entire shower room clean with a rag.
